Neon Yellow - Reflective Vinyl Sheet/Roll HTV
Vinyls are available in 3 different sizes
1- Size: Approximately 19.6" x 1 Feet
2- Size: Approximately 19.6" x 1 Yard
3- Size: Approximately 19.6" x 5 Yard
4- Size: Approximately 19.6" x 15 Yard
Pro-Vinyl Heat Transfer
We guarantee Highest Quality Material in all of our Heat Transfer Vinyl Product. Thinner and lighter vinyl makes it easy to print on T-shirts, Tank Tops, Hoodies, Tote bags, Hats, Caps and Fabric etc.
Pro-vinyl heat transfer vinyl is the ideal solution for high quality, detailed designs and numbering for t-shirts, sportswear and other garments where durability is essential. This easy to cut & weed vinyl has high elasticity and strong adhesiveness, allowing fabrics to stretch through natural movement and the ability to withstand frequent washing.
1. Make your design and flip (mirror image)
2. Cut from the back of the sheet
4. Heat press (Temperature: 320° F or 160° C - Time: 10-12 seconds)
5. Peel off (Warm or cool)
- Specs: Polyurethane vinyl - 20” wide - 42 micron thickness
- Application materials: Cotton, Polyester, Cotton/Poly Blends [T-shirts, Sport jerseys, Uniforms, Hoodies & Sweatshirts, Jackets, Caps, Umbrellas, etc.]
- Washing Instructions: Machine Wash Warm, Use Non-Chlorine Bleach Only, Tumble Dry Medium
- Made in Korea
Please Note: Color may vary on different computer screens. We guarantee that the color of the product will an exact match of manufacturer's color chart.
HEAT PRESS MACHINE INSTRUCTION
Set Heat Press temperature to 320 degrees and timer to 10-12 seconds. Place the fabric on Heat Press bed. Take Vinyl transfer sheet and separate the clear sheet from the white sheet (Vinyl should stick to the clear plastic sheet).Place a Teflon paper over the Vinyl transfer. Heat Press for 10-12 seconds. Slowly peel the clear plastic sheet away from the fabric. Vinyl would be printed on the fabric.
(HOUSEHOLD IRON INSTRUCTION)
(It is always recommended to use a Heat Press machine for all heat transfer material to any fabric) Preheat iron to cotton setting 340 degrees. Carefully lift and separate the rhinestone clear sheet from the white sheet (Vinyl should stick to the clear plastic sheet). Place the transfer sheet, Vinyl side down onto the fabric and press gently with your hand. If it is not in the desired position, lift and reposition again. Place the Hot Iron on it and apply steady pressure for 10-12 seconds. Place iron over other design area for another 10-12 seconds and repeat till entire design is pressed. Slowly peel the clear plastic sheet away from the fabric. Vinyl would be printed on the fabric.
Wash the garment inside out in cold delicate cycle and hanger dry.
Your one stop shopping for all Heat Transfer Vinyl, Rhinestone transfer design, Iron on Transfer Hot Fix Motif, Bling stones, DIY for T-shirts, Hoodies, Tank Tops, sweatshirts, caps, Tote bags, etc.
THANK YOU VERY MUCH FOR SHOPPING WITH US.
PLEASE VISIT US AGAIN FOR NEW DESIGNS ADDING EVERYDAY IN OUR STORE.
$$$$$$$$$ :) :-) HAPPY BUYING :) :-) $$$$$$$$$