Silver - Soft Metallic Vinyl Sheet/Roll HTV

SKU:
SCS-01
$2.50
Width:
8.00 (in)
Height:
0.20 (in)
Depth:
8.00 (in)
Current Stock:
Adding to cart… The item has been added

Size: Approximately 20"(W) x 12"(H) (inches) 

Metallic Vinyl Heat Transfer

Glossy metallic effect with no stretchability.  

We guarantee Highest Quality Material in all of our Heat Transfer Vinyl Product. Thinner and lighter vinyl makes it easy to print on T-shirts, Tank Tops, Hoodies, Tote bags, Hats, Caps and Fabric etc.

(Temperature and Time Setting)

Vinyl: Set Heat Press temperature to 340 degrees and timer to 15-20 seconds.

Rhinestone: Set Heat Press temperature to 330 degrees and timer to 12-15 seconds.

Rhinestud: Set Heat Press temperature to 320 degrees and timer to 6-8 seconds.

 

(HOUSEHOLD IRON INSTRUCTION)

(It is always recommended to use a Heat Press machine for Rhinestone transfer to any fabric) Preheat iron to cotton setting 340 degrees. Carefully lift and separate the rhinestone clear sheet from the white sheet (Vinyl should stick to the clear plastic sheet). Place the transfer sheet, Vinyl side down onto the fabric and press gently with your hand. If it is not in the desired position, lift and reposition again. Place the Hot Iron on it and apply steady pressure for 10-12 seconds. Place iron over other design area for another 10-12 seconds and repeat till entire design is pressed. Slowly peel the clear plastic sheet away from the fabric. Vinyl would be printed on the fabric.

 

HEAT PRESS MACHINE INSTRUCTION

Set Heat Press temperature to 300 degrees and timer to 10-12 seconds. Place the fabric on Heat Press bed. Take Vinyl transfer sheet and separate the clear sheet from the white sheet (Vinyl should stick to the clear plastic sheet).Place a Teflon paper over the Vinyl transfer. Heat Press for 10-12 seconds. Slowly peel the clear plastic sheet away from the fabric. Vinyl would be printed on the fabric.

 

WASHING INSTRUCTION

Wash the garment inside out in cold delicate cycle and hanger dry.

 

SHIPPING

PLEASE NOTE: We pack our rhinestone transfer designs very tightly to ensure your item arrives intact. Some larger transfers will be shipped in two pieces. This is to ensure your transfer arrives intact. The two pieces will be easy to line up and iron on.

Your one stop shopping for all Heat Transfer Vinyl, Rhinestone transfer design, Iron on Transfer Hot Fix Motif, Bling stones, DIY for T-shirts, Hoodies, Tank Tops, sweatshirts, caps, Tote bags, etc.

THANK YOU VERY MUCH FOR SHOPPING WITH US.

PLEASE VISIT US AGAIN FOR NEW DESIGNS ADDING EVERYDAY IN OUR STORE.

$$$$$$$$$  :) :-)   HAPPY BUYING   :)  :-)  $$$$$$$$$